How To Check Your Antifreeze

It may not cross most people's minds, but checking your car's antifreeze protection level is an important part of regular maintenance. Anti-freeze helps protect your car from damage caused by cold weather, and keeping it at the proper level could save you from costly repairs down the road. In this article, we will show you how to check your car's antifreeze protection level and what to do if it needs to be adjusted.

What You Need

Before you begin, there are a few items you need for the job:

• An anti-freeze tester: These are usually sold for just a few dollars at any auto parts store.

• Paper towel or rag: This will help keep the anti-freeze off of surfaces like paint that could get damaged.

• Ziplock bag: This will help keep dirt out of your anti-freeze tester while you’re not using it.

Step 1: Locate The Reservoir

The first step is to locate the reservoir where your car’s anti-freeze is stored. This is usually in the engine compartment, and it looks like a plastic container with a lid on top (as seen in Figure 1). There should also be a warning label telling you not to open the lid while the fluid is hot – so always make sure that your car has been sitting idle for at least two hours before proceeding! 

Step 2: Testing The Anti-Freeze

Now that you have located the reservoir, insert the end of your tester into the fluid (you may have to use a straw attached to the bottom of the tester). Then pump up and down until about half of the fluid has been drawn up into the glass chamber on top (Figure 2). Now look at how many “balls” are floating on top of the fluid; this number tells you how well protected your car is against extreme cold temperatures (see Table 1 below). Once done testing, pour any remaining liquid into its original container, then wipe off any residue with paper towel or rag. 

Step 3: Storing The Tester

After testing, take a ziplock bag and store your anti-freeze tester in it until its next use. This will help keep dust and dirt off of it when it’s not in use! And don't forget - always remember that antifreeze is poisonous so make sure none gets on any surfaces outside of its original container!   

Checking your car's antifreeze protection level doesn't have to be difficult or complicated; with these simple steps anyone can do it themselves! With regular testing every few months, you'll know exactly how well protected against extreme cold temperatures your vehicle really is - potentially saving yourself hundreds or thousands of dollars in repairs down the line!

7 Steps to Buying Your First Car

1. Figure out what you can afford

2. Shop around for the best deal

3. Test drive different cars

4. Get a car history report and mechanical inspection

5. Finalize the purchase and register the car

6. Insure your car

7. Enjoy your new ride!

Stick To Your Budget

First time car buyers often make the mistake of rushing into a purchase without doing their research first. This can lead to overpaying for a car that doesn’t fit their needs or budget.

By setting a budget first, you can avoid this common pitfall. Figure out how much you can comfortably afford to spend on a car payment each month. Then, research the Fair Market Range prices for the type of car you’re interested in. This will give you a good starting point

Start Your Research

With an established budget in hand, it’s time to start shopping around for the best deal. There are so many sites online to do research where you can check out safety ratings, available options, interior features and more.

Test Drive Several Cars

After you’ve narrowed down your choices, it’s time to take them for a spin. This will help you get a feel for how the car drives and handles. It’s also a good time to see if there are any additional features that you may want or need.

Get A Car History Report And Mechanical Inspection

Once you’ve found the perfect car, it’s time to do a little digging into its history. A car history report will tell you if the car has been in any accidents or had any major repair work done.

Finalize The Purchase and Register The Car

After you’ve negotiated the price of the car, it’s time to finalize the purchase. This usually involves signing a sales contract and putting down a deposit. The great news is that the dealership will typically handle all the paperwork involved in registering the car.

Insure Your Car

Now that you’re the proud owner of a new car, it’s time to get it insured. The type and amount of coverage you need will vary depending on your state’s laws and your personal driving habits.

Enjoy your new ride!

Buying your first car is a big decision, but we’re here to help make it as easy as possible. We want you to be happy with your purchase and our team will be with you every step of the way.

Contact us today to get started.

Wheel Alignment - Avoiding The Danger Signs Ahead

If you're experiencing problems with your car pulling to one side, it may be due to a misaligned wheel. A wheel alignment can correct this problem and ensure that your car drives in a straight line. Avoid the danger of driving with a misaligned wheel by getting it corrected at a reputable automotive shop.

Most people don't think about their vehicle's alignment until they experience unusual tire wear or handling concerns. However, just like any other component of your car, regular upkeep is critical to maintaining it in good working order. Here are four reasons why routine wheel alignments are essential.

Wheel Alignments Prevent Uneven Tire Wear

The number one reason to keep up with your wheel alignments is to prevent uneven tire wear. When your wheels are out of alignment, they put unnecessary stress on your tires. This can cause them to wear down faster on one side than the other. It also reduces the life of your tires and makes them more likely to fail unexpectedly.

Wheel Alignments Improve Handling

Another important reason to get regular wheel alignments is to improve the handling of your vehicle. When your wheels are out of alignment, it can make your car feel unstable on the road. This can be dangerous, especially when driving at high speeds or in adverse weather conditions.

Wheel Alignments Improve Fuel Efficiency

When your wheels are out of alignment, your car has to work harder to move forward. This extra effort means that your car will burn through fuel more quickly. In addition, drag from misaligned wheels can also cause your car to lose speed, which wastes even more fuel.

Wheel Alignments Extend the Life of Your Suspension

When your wheels are out of alignment, they place extra stress on your suspension components. Over time, this extra stress can cause these parts to wear out prematurely, resulting in a need for costly repairs or even replacement.

Regular wheel alignments are an important part of keeping your car running safely and efficiently. If you've noticed any unusual tire wear or handling problems, be sure to schedule an appointment with a qualified mechanic right away.

Your Brakes Are Telling You Something!

Brakes are an essential part of every car, helping you to slow down and stop when needed. Generally, if your brakes are making a high-pitched squealing noise when you first step on them, it's an indication that the brake pads need to be replaced.

What causes that noise when you brake?

This can be due to a number of different factors - worn or dirty brake pads, issues with the rotors or calipers, or even something as simple as dirt or debris caught in the brakes.

If you're noticing a strange noise coming from your brakes, it's always best to have them checked out by a professional mechanic to ensure there isn't a bigger issue at play.

What are the different types of brakes, and how do they work?

There are many different types of brakes, each designed to perform a specific function and work in a particular way. Some common brake types include disc brakes, drum brakes, and vacuum brakes.

Disc brakes use a system of pads that press against a spinning metal disc to slow or stop the vehicle. Drum brakes consist of two brake shoes that press against the inside of a stationary metal drum. Vacuum brakes use suction to slow or stop a vehicle, drawing air from the atmosphere into chambers

How can you tell if your brakes need to be serviced or replaced?

If your car is making a noise when you brake, there's a good chance that something is wrong with your brakes. There are several things you can do to check your brakes and see if they need to be serviced or replaced.

Another way to tell if your brakes are in need of service is to look at your brake fluid levels. If the fluid is low or dark, it could be a sign that your brakes need to be flushed and refilled.

What does turning the Rotors mean?

If you've ever had your car's brakes serviced, you may have heard the term "turning the rotors." But what does that actually mean?

Rotors are the metal discs that your brake pads press against to slow or stop your car. When they become worn or dirty, they can cause a number of problems with braking performance. Turning the rotors means machining them down so that they are smooth and clean again, allowing for better braking. If they get worn down below a certain point, they will need to be replaced entirely by a mechanic.

As a driver, it's important to be aware of any issues with your car's brakes, as this can have serious implications for your safety on the road. Some common symptoms of worn or faulty brakes include a high-pitched squealing noise when braking, low or dark brake fluid levels, vibrations or shuddering when applying the brakes, and poor response time. If you notice any of these issues, be sure to have your brakes checked by a professional mechanic as soon as possible.

5 Tips To Keep Your Parked Car Cooler

Summertime is approaching fast, and with it, soaring temperatures. The last thing you want to do is climb into a scorching car and wait for it to cool down.

Did you know "When temperatures outside climb range from 80 degrees to 100 degrees, the internal temperature of your car can reach a scorching 130 to 172" (actionnews)

What Can You Do To Lower The Temperature In Your Car?

• Tip 1: Park in the Shade

If you have the option to park in the shade, take it! In many parking lots they will have trees or other natural shade options, Also try to park so that the sun is not shining on the driver's side. Even a few minutes in the shade can make a big difference.

• Tip 2: Use Your Visor And A Sunshade

You can find a sunshade for your windshield at most auto stores. Sunshades are especially useful if you have to park in the direct sun. They will help keep your car cooler and make it more comfortable to get in. Your windshield visor can also help keep the sun from entering your car

You could also fit a visor to your rear window as well as invest in window vent visors to keep individual passenger windows shaded.

• Tip 3: Let Your Car Cool Before Getting In

Does your car have a remote starter? You turn on the air conditioning to full blast, shut all the doors and give your car a few minutes to cool down before driving. The other option is Leave the doors open for a minute to let most of the hot air out before getting in.

• Tip 3: Cover Up Steering Wheel

No one wants to try to dive with a hot steering wheel. Consider placing a light-colored terry cloth towel over the steering wheel before you leave the car. This may reduce how much heat it absorbs

• Tip 4: Cover Your Seats

This will protect your seats from the sun's rays and reduce how much heat they absorb. If you have leather seats, this is especially important as they can get uncomfortably hot in direct sunlight. You can buy special seat covers designed to reflect the sun's rays, or just use a light-colored towel or blanket

• Tip 5: Tint You Windows

One of the best ways to keep your car cool is to tint your windows. This will reduce the amount of heat that comes into the car, making it more comfortable when you get in.

While you may or may not be able to do all of these things, any combination will help make your car more comfortable in the summer heat. Enjoy your summer and stay cool!